MSMSS00017
Use High Pressure Water Jetting Training in Perth
Introductory unit covering the safe setup, use, and shutdown of high pressure water jetting equipment under supervision in accordance with WHS requirements.
View Course Details
Operate High Pressure Water Jetting Training in Perth
MSMSS00018
Operate a high pressure water jetting system - Skill Set
High pressure water jetting course in Perth for water jetting team members ready to move from supervised work to independent operation. MSMSS00018 Operate a high pressure water jetting system is the nationally recognised skill set that qualifies a water jetting team member to operate high pressure water jetting equipment independently on site, covering safe system operation, permit-to-work procedures, emergency response, and general workplace safety across four units of competency. Suited to workers with existing high pressure water jetting experience who are ready to extend their scope of work to independent operation.
- Over 25+ Years of Experience
- Best Prices & No Hidden Fees
- Nationally Recognised
- Highly Qualified Team
- Duration
- 2 Days
- Price
- $800
- Location
- WA | Bayswater
- Delivery
- Face to Face
Course Overview
MSMSS00018 is the independent-operator level of the water jetting training pathway, above the entry-level MSMSS00017 Use high pressure water jetting equipment skill set. It gives Learners the practical skills and knowledge to safely and independently operate high pressure water jetting systems across industrial, civil and maintenance environments — covering how to plan and prepare for jetting operations, assemble and set up Class B equipment, conduct gun and lance-based jetting operations, manage site hazards and permits, and complete all shutdown, maintenance and documentation requirements.
The core unit in this skill set, MSMWJ304 Operate a high pressure water jetting system, represents the operator level of high pressure water jetting competency. A qualified operator can work independently and supervise other team members — the key difference from MSMWJ202, which covers supervised use only. This skill set applies to Class A and Class B high pressure water jetting systems and is used for cleaning, preparing, abrading, cutting and demolishing concrete, steel, plant, equipment, vessels and infrastructure.
Training is delivered in compliance with AS/NZS 4233.1:2013 High Pressure Water Jetting Systems — Safe Operation and Maintenance and the Safe Work Australia Guide for Managing Risks from High Pressure Water Jetting, alongside the workplace safety, permit and emergency response competencies covered by the skill set’s other three units — MSMWHS200 Work safely, MSMPER200 Work in accordance with an issued permit, and MSMWHS110 Follow emergency response procedures.
Training is delivered by experienced industry trainers at Paratus’s Bayswater facility or on-site across Western Australia.
Course Dates
Can't see a date that suits you?
We can often schedule sessions around individual and company requests. Tell us when suits and we'll get back to you within one business day.
Course Details
Certification
Participants who successfully complete all training and assessment requirements will be issued a Statement of Attainment by Paratus Training (RTO 45274), for the skill set:
MSMSS00018 – Operate a High Pressure Water Jetting System
- MSMWJ304 Operate a high pressure water jetting system
- MSMPER200 Work in accordance with an issued permit
- MSMWHS110 Follow emergency response procedures
- MSMWHS200 Work safely
This unit is nationally recognised. Full details, including the current version and any updates, are available on the national training register at training.gov.au.
Course Outline
- WHS legislation, AS/NZS 4233.1:2013, and the Safe Work Australia Guide for high pressure water jetting
- High pressure water jetting system classifications — Class A and Class B
- Pump and engine operation, including start-up and shutdown sequences
- Selection and fitting of jetting nozzles, lances and hoses
- Pre-operational equipment checks and fault identification
- Gun/lance operation and jetting technique for industrial cleaning and surface preparation
- System monitoring during operation, including pressure management
- Hazard identification and risk control specific to HPWJ operation
- Working to the scope, conditions and authorisation of an issued site permit
- Recognising emergency situations and responding under site emergency procedures
- General WHS hazard identification and safe work practices
- Equipment maintenance checks, fault-finding and shutdown procedures
- Documentation and reporting requirements
Prerequisites and Entry Requirements
This course has a mandatory prerequisite and a minimum industry experience requirement .
Prerequisite unit: Participants must hold a Statement of Attainment for the skill set MSMSS00017 – Use High Pressure Water Jetting Equipment or the single unit MSMWJ202 – Use High Pressure Water Jetting Equipment before enrolling. If you have not yet completed this unit, visit our MSMSS00017 course page to find out more.
Supervised work practice requirement: Under AS/NZS 4233.1:2013 and the updated training package, participants must have completed a minimum of 120 hours of supervised work practice on high pressure water jetting equipment before this unit can be completed. Participants must provide evidence of this when enrolling.
All participants must also:
- Be 18 years of age or older
- Hold a valid Unique Student Identifier (USI)
- Provide valid proof of identity
- Have sufficient Language, Literacy and Numeracy (LLN) skills to participate in training and assessment
- Be physically fit to perform practical tasks involving manual handling, hose control, and extended periods of standing and working with equipment
- Bring a pen
- Wear appropriate PPE: steel-capped boots, long pants, and a hi-vis long sleeve shirt. If you do not have a hi-vis shirt, Paratus Training can provide a hi-vis vest
Please let us know before enrolment if you have any medical conditions, injuries, or physical limitations that may affect your ability to take part in practical training.
Construction Training Fund (CTF)
If you work in WA’s building and construction industry, this course may be eligible for subsidised training support through the Construction Training Fund (CTF). Eligibility depends on the course and your employer’s CTF registration — ask us at enrolment to check.
Nationally Recognised Training
This course is nationally recognised training, delivered under our registration as RTO #45274. On completion, you’ll receive a Statement of Attainment recognised by employers and regulators across Australia, and verifiable through your USI account.
Who needs this training?
New to industry
If you hold MSMSS00017 or MSMWJ202 and have completed 120 hours of supervised jetting experience, this course qualifies you to operate a high pressure water jetting system independently and supervise other team members. It is the required step up from the supervised-use level of competency.
Renewal due
AS/NZS 4233.1:2013 High Pressure Water Jetting Systems — Safe Operation and Maintenance requires that verification of competency or refresher training be carried out and documented at intervals not exceeding two years. If your two years are approaching or have passed, this course gets you back up to date with current standards and procedures.
Team training
If your business operates high pressure water jetting equipment and needs qualified independent operators, we can come to your site. On-site delivery is available across Western Australia and can be conducted using your own equipment in your own work environment. Contact us to discuss group bookings and scheduling options.
Related Courses
RIIWHS202E and MSMWHS217
Confined Space and Gas Testing Training in Perth
Confined space entry and gas testing training in Western Australia. Covers RIIWHS202E and MSMWHS217. Face-to-face, on-site delivery available across WA. Delivered by Paratus Training.
View Course Details
CPCWHS1001
White Card Training in Perth
White Card - Nationally recognised general construction induction. Required before starting work on any construction site in Australia.
View Course DetailsFrequently asked questions
Can't find your answer? Call us on (08) 6400 6000.
Most Learners enrol online through our website. You’ll select your course and preferred date, provide your contact details, supply or create a USI, and pay the course fee. Your enrolment is confirmed once payment is received, and you’ll get a booking confirmation with everything you need for the day.
If you’d prefer to enrol by phone or email, contact us directly.
At minimum, bring:
- Current photo ID; driver’s licence or passport. No ID means no course.
- A second form of ID if you’re completing a High Risk Work Licence course — Medicare card, bank card, or proof of age card.
- Your USI.
- Any pre-requisite cards or certificates required for the course.
- Appropriate PPE and clothing as listed on the course page; closed-toe boots, hi-vis where required, sun-safe clothing for outdoor training.
- A water bottle, pen, and notepad and some lunch.
The full list for your specific course is on the course page and in your booking confirmation. If you’re unsure, call us before the day.
Arrive at least 15 minutes before your scheduled start time. We use that time to check IDs, confirm USIs, and get everyone settled before training begins.
If you’re running late, call us before 7:30am so we know you’re on your way.
If you arrive after training has started without having contacted us, you may be refused entry and the full course fee will still apply.
A standard training day runs from approximately 7:30am to 4:00pm. You’ll have breaks for morning tea and lunch.
Our courses are structured to keep classroom time to a minimum. Theory is covered as efficiently as possible so the majority of your day is spent on practical, hands-on training with real equipment. That’s where competency is built, and it’s where we focus.
Tea, coffee, and water are provided at our Bayswater facility. There’s a kitchen area with a microwave, and your trainer will point out nearby food options if you want to grab lunch off-site. A vending machine for snacks and drinks, as well as a fully automated coffee vending machine is also available on site.
Being assessed as Not Yet Competent means you need more practice before you can demonstrate the skill to standard. It is not the end of the road.
- First re-assessment: at no additional cost. We’ll book you into the next available session.
- Second re-assessment: charged at cost. Your trainer will advise the amount.
- After three Not Yet Competent results for the same unit, no further re-assessments are available. You would need to re-enrol from the beginning.
If you believe your result was made in error, you have the right to appeal, please see our complaints and appeals policy.
You are not alone, and it is not a barrier to completing your training.
Paratus Training works with a wide range of learners, including those with dyslexia, neurodiverse learners, people who left school early, those for whom English is a second language, and those who have never felt comfortable in a classroom or exam setting. Our trainers are experienced, patient, and adapt their approach to suit different learning styles.
If you have a support need, we encourage you to let us know before your training begins. We can discuss reasonable adjustments and put the right support in place so you have a fair opportunity to participate and demonstrate your skills.
What kind of support is available?
Support varies depending on individual needs but may include additional time, or access to supplementary resources. Our team will work with you to find a practical solution.
Important: If you’re completing a High Risk Work Licence unit, WorkSafe WA requires the written knowledge assessment to be completed in English, without an interpreter, and without assistance. This is not something we can adjust. If your written English is not at that level, the HRWL pathway may not be appropriate for you at this time, please call us to discuss your options.
Not sure if you need support, or just want some reassurance before you book?
Get in touch with our team at admin@paratus.edu.au before your training. There are no silly questions, and a conversation costs nothing.
Once training has started, no refund is available. This applies regardless of the reason, including if you are assessed as Not Yet Competent.
If Paratus cancels or reschedules a course, due to trainer availability, equipment, or any other reason, you will receive a full refund, or the option to transfer to another available date. We do not cover travel, accommodation, or lost wages in the event of a cancellation or reschedule.
If something genuinely outside your control prevents you from attending, please contact us directly. Our CEO or Training Manager may apply discretion in extenuating circumstances.
A USI (Unique Student Identifier) is a reference number that creates a permanent online record of your nationally recognised training and qualifications. It is a federal government requirement, and anyone undertaking nationally recognised training in Australia must have a USI before a Statement of Attainment or qualification can be issued.
Your USI stays with you for life, giving you access to your training records in one place regardless of where or when you completed your training.
How do I get one?
Creating a USI is free and takes only a few minutes. You will need a form of identity document to verify your details. You can create your USI directly through the official USI website: https://www.usi.gov.au/students/create-your-usi
What do I need to do before my training?
You must provide Paratus Training with your USI prior to completing your training. Without a valid USI, we are unable to issue your Statement of Attainment.
A VET (Vocational Education and Training) transcript is an official record of all nationally recognised training you have completed in Australia. It is linked to your USI and maintained by the Australian government.
Some units of competency have prerequisite requirements, meaning you must hold a specific unit before you can enrol. Your VET transcript is the most reliable way to confirm and demonstrate that you hold the required prerequisites.
How do I access my VET transcript?
You can view and download your VET transcript for free through the USI website. You will need a USI to access it.
Visit: https://www.usi.gov.au/usi-vet-transcripts/students-and-their-vet-transcripts
What if a unit is missing from my transcript?
If you believe you hold a prerequisite unit but it does not appear on your transcript, contact the training organisation that issued it. They may need to submit or correct your records with the relevant authority.
Paratus Training cannot verify or accept prerequisites that are not evidenced by appropriate documentation.
A Statement of Attainment is the nationally recognised certificate issued when you successfully complete a unit of competency. It confirms you have been assessed as Competent against the national standard.
When you’ll receive yours depends on where your training was delivered:
- Bayswater facility: You’ll receive a hard copy on the day, plus a digital copy emailed to you within 24 hours of completing training.
- Your worksite: Allow 2–4 weeks for processing. Your Statement of Attainment will be emailed to you once complete.
In all cases, we issue Statements of Attainment within 30 days of you meeting all course requirements, provided your fees are paid in full and a verified USI is on file.
Your Statement of Attainment is sent as a PDF to the email address you provided at enrolment. Each certificate carries a digital signature, a unique certificate number, and a QR code that employers can use to verify authenticity.
On the day of your assessment, your assessor will issue a Notice of Assessment (NoA) if you are found Competent. This document triggers your licence application with WorkSafe WA, but it has a 60-day validity window. If you don’t lodge within 60 days, the NoA expires and you would need to complete the course again.
You have two options for lodging:
Lodge directly with WorkSafe WA
No additional cost from us. To apply in person at a WorkSafe WA office, you’ll need:
- Your Statement of Attainment
- Your white copy of the Notice of Assessment (dated within the last 60 days)
- Photo proof of identity
- A passport-quality photo
- Payment for the WorkSafe licence fee
Full details and online application options are available at www.wa.gov.au/government/multi-step-guides/high-risk-work-licensing/apply-new-high-risk-work-licence
We lodge on your behalf
For a flat fee of $120 (subject to change), which includes the WorkSafe licence fee itself, our team will manage the submission for you and ensure it’s lodged on time. Speak to us at the time of your training to arrange this.
Don’t leave this sitting. Sixty days moves quickly, and the cost of missing the window is having to retrain from scratch.
Yes. Paratus complies with the Privacy Act 1988 and the Australian Privacy Principles.
We are required by law to collect and report certain student information to government bodies including ASQA, NCVER, and the USI Registrar. This is a condition of delivering nationally recognised training and is not optional. Your data is not sold or shared with third parties for any other purpose.
You can request access to your own records at any time — bring photo ID. For the full detail on how your information is handled, visit www.oaic.gov.au .
Complaints
You can raise a concern about anything affecting you as a learner: course quality, staff conduct, fees, facilities, privacy, or discrimination. Raise it in person, by phone, or by email to admin@paratus.edu.au . Your enrolment continues throughout the process and you will not be disadvantaged for raising a concern.
Most issues are resolved informally. If not, lodge a formal written complaint and we’ll acknowledge it within 2 business days. An independent investigator will review the matter, both parties have the opportunity to present their position, and we aim to resolve as quickly as possible.
Appeals
If you disagree with a decision we’ve made — an assessment result, a credit transfer refusal, a disciplinary outcome — you can appeal. Grounds include procedural error, new evidence, incorrect application of policy, or bias. Lodge your appeal in writing to the CEO, stating the decision, your grounds, and your requested outcome. We acknowledge within 5 business days and aim to resolve as soon as possible.
If you remain unsatisfied after our internal process, you can request an independent external review or escalate to the relevant regulator. For training quality matters, contact ASQA on 1300 701 801 or www.asqa.gov.au/complaints . For HRWL-related matters, contact WorkSafe WA on 1300 307 877.
Paratus Training is a registered training organisation (RTO 45274) delivering nationally recognised High Risk Work Licence, safety, and operational training across WA. Our trainers are active industry practitioners, and every assessment is run to the standard set by WorkSafe WA and the relevant training package — not signed off as a formality.